Catalogue / Peridotite-hearth smelting forge / Turlach Post 524
peridotite-hearth smelting forge
Turlach Post 524
USD 53800.66
Listed
Add to listConcept listing. No order can be placed.
- Peak temperature 690 degrees celsius
- Chamber capacity 460 litres
- Heat up 332 minutes
- Cycles before relining 444 cycles
About this item
The Turlach Post 524 is a peridotite-hearth smelting forge listed with peak temperature 690 degrees Celsius, chamber capacity 460 litres, heat up 332 minutes. Its remaining stated figures are cycles before relining 444 cycles, unit price 53800.66 dollars, heat source induction. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| peak temperature | 690 degrees Celsius |
|---|---|
| chamber capacity | 460 litres |
| heat up | 332 minutes |
| cycles before relining | 444 cycles |
| unit price | 53800.66 dollars |
| heat source | induction |
Owner feedback
Showing the 7 most recent of 102 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- PRPetr Rask★★★★★
2026-07-22Cycles before relining at 444 cycles, as listed
We looked at most of the peridotite-hearth smelting forge listings before settling on the Turlach Post 524. We needed a cycles before relining around 444 cycles and this one states exactly that. If your requirement is not cycles before relining, the Turlach Post 524 has no other reason to win.
- AMAnneke Melle★★★☆☆
2026-07-09Where the Turlach Post 524 falls short
The Turlach Post 524 was not the cheapest peridotite-hearth smelting forge we considered, and that was fine. Packaging on the Turlach Post 524 was poor enough that we checked it over carefully on arrival. Take it as context rather than a complaint about the Turlach Post 524.
- NVNadia Vance★★★★★
2026-07-04Better than what we ran before the Turlach Post 524
Replaced a much older peridotite-hearth smelting forge with the Turlach Post 524 last season. Our previous unit did the job; the Turlach Post 524 does it without us watching it. Worth knowing before you commit to the Turlach Post 524.
- DLDagny Lindqvist★★★★★
2026-07-02Commissioning the Turlach Post 524
Came to the Turlach Post 524 on a recommendation and checked its peridotite-hearth smelting forge figures ourselves. Commissioning the Turlach Post 524 took an afternoon and no specialist help. We would put another Turlach Post 524 in without much thought.
- NKNils Kestrel★★★★★
2026-06-30Induction was the requirement; the Turlach Post 524 meets it
Went through the whole peridotite-hearth smelting forge catalogue twice before the Turlach Post 524. Its heat source is induction, and for the Turlach Post 524 that is the whole point. The rest of the Turlach Post 524 specification did not enter into the decision.
- HBHalla Barrow★★★☆☆
2026-06-17How the Turlach Post 524 fits what we actually do
Shortlisted three peridotite-hearth smelting forge units and the Turlach Post 524 was the one we kept. Ours is a teaching setting and the Turlach Post 524 gets handled by people who are learning. Others may weigh it differently, but the Turlach Post 524 suits us.
- LBLise Byrne★★★★★
2026-06-16332 minutes was the requirement
The Turlach Post 524 is our third peridotite-hearth smelting forge and the first one specified properly. The figure that mattered was the heat up: 332 minutes. We never looked at the other axes once 332 minutes checked out.