Catalogue / Footwall-drive fabrication bay / Nordreth Unit 246
footwall-drive fabrication bay
Nordreth Unit 246
USD 1623.16 per session
Listed
Add to listConcept listing. No order can be placed.
- Depth below grade 160 metres
- Floor area 575 square metres
- Occupancy 53 people
- Session length 10 hours
About this item
The Nordreth Unit 246 is a footwall-drive fabrication bay listed with depth below grade 160 metres, floor area 575 square metres, occupancy 53 people. Its remaining stated figures are session length 10 hours, session fee 1623.16 dollars, access route stair shaft. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| depth below grade | 160 metres |
|---|---|
| floor area | 575 square metres |
| occupancy | 53 people |
| session length | 10 hours |
| session fee | 1623.16 dollars |
| access route | stair shaft |
Owner feedback
Showing the 7 most recent of 116 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- SKSanna Kestrel★★★★☆
2026-07-28Does what it says: occupancy 53 people
Second footwall-drive fabrication bay we have run; the Nordreth Unit 246 replaced an older one. On paper the occupancy is 53 people, and that matched the requirement exactly. Would choose the Nordreth Unit 246 again on the same grounds.
- KVKatrin Vasilenko★★★★☆
2026-07-26The Nordreth Unit 246 against the unit it replaced
Shortlisted three footwall-drive fabrication bay units and the Nordreth Unit 246 was the one we kept. The Nordreth Unit 246 replaced a unit we had outgrown, and the difference shows day to day. Worth knowing before you commit to the Nordreth Unit 246.
- LILise Ilkka★★★☆☆
2026-07-24Worth knowing before you order the Nordreth Unit 246
Went through the whole footwall-drive fabrication bay catalogue twice before the Nordreth Unit 246. The documentation with the Nordreth Unit 246 is thin, and we worked out the rest ourselves. It has not changed what we think of the Nordreth Unit 246 overall.
- TOToma Ostrem★★★★★
2026-07-19Does what it says: session length 10 hours
The Nordreth Unit 246 is our third footwall-drive fabrication bay and the first one specified properly. Its session length reads 10 hours, and that is the whole reason it is here. On the other axes the Nordreth Unit 246 sits where the rest of the footwall-drive fabrication bay listings sit.
- YNYusra Norrland★★★★★
2026-07-11Ours is not a heavy-duty use for the Nordreth Unit 246
Bought the Nordreth Unit 246 after a long comparison against the rest of this footwall-drive fabrication bay shortlist. We put the Nordreth Unit 246 on the awkward jobs that the rest of the kit cannot take. The Nordreth Unit 246 is still the right call for us.
- OGOskar Grieve★★★★☆
2026-07-03The Nordreth Unit 246 after a year of steady use
Replaced a much older footwall-drive fabrication bay with the Nordreth Unit 246 last season. Two seasons in, the Nordreth Unit 246 has not needed anything we did not plan for. Others may weigh it differently, but the Nordreth Unit 246 suits us.
- RSRuben Sarto★★★★★
2026-06-26Stair shaft, which is what we needed from the Nordreth Unit 246
Have had the Nordreth Unit 246 in service long enough to say something useful about this footwall-drive fabrication bay. We needed stair shaft rather than the alternatives, and the Nordreth Unit 246 states it. No complaints beyond the access route of stair shaft, and no surprises either.