Catalogue / Dilatant-phase printing bench / Nordreth Unit 300
dilatant-phase printing bench
Nordreth Unit 300
USD 10652.01
Listed
Add to listConcept listing. No order can be placed.
- Working width 56 centimetres
- Process temperature -3 degrees celsius
- Batch throughput 11.6 kilograms
- Cycle hours 92 hours
About this item
The Nordreth Unit 300 is a dilatant-phase printing bench listed with working width 56 centimetres, process temperature -3 degrees Celsius, batch throughput 11.6 kilograms. Its remaining stated figures are cycle hours 92 hours, unit price 10652.01 dollars, drive type fully manual. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| working width | 56 centimetres |
|---|---|
| process temperature | -3 degrees Celsius |
| batch throughput | 11.6 kilograms |
| cycle hours | 92 hours |
| unit price | 10652.01 dollars |
| drive type | fully manual |
Owner feedback
Showing the 7 most recent of 96 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- JPJosip Pehrson★★★★★
2026-08-01Does what it says: process temperature -3 degrees Celsius
Second dilatant-phase printing bench we have run; the Nordreth Unit 300 replaced an older one. Its process temperature reads -3 degrees Celsius, and that is the whole reason it is here. The rest of the Nordreth Unit 300 specification did not enter into the decision.
- CMCormac Melle★★★★☆
2026-07-29Chose the Nordreth Unit 300 for being fully manual
We looked at most of the dilatant-phase printing bench listings before settling on the Nordreth Unit 300. The Nordreth Unit 300 lists fully manual, which is what our site is set up for. The rest of the Nordreth Unit 300 specification did not enter into the decision.
- WSWren Sundby★★★★★
2026-07-13Installation notes for the Nordreth Unit 300
Went through the whole dilatant-phase printing bench catalogue twice before the Nordreth Unit 300. Commissioning the Nordreth Unit 300 took an afternoon and no specialist help. Worth knowing before you commit to the Nordreth Unit 300.
- MIMilen Ilkka★★★★☆
2026-07-08Dilatant-phase printing bench at 11.6 kilograms
The Nordreth Unit 300 is our third dilatant-phase printing bench and the first one specified properly. The figure that mattered was the batch throughput: 11.6 kilograms. Would choose the Nordreth Unit 300 again on the same grounds.
- TBToma Barrow★★★★★
2026-06-28Second time around with a dilatant-phase printing bench: the Nordreth Unit 300
The Nordreth Unit 300 was not the cheapest dilatant-phase printing bench we considered, and that was fine. The Nordreth Unit 300 replaced a unit we had outgrown, and the difference shows day to day. Worth knowing before you commit to the Nordreth Unit 300.
- LVLise Vasilenko★★★★★
2026-06-27Two seasons with the Nordreth Unit 300
Shortlisted three dilatant-phase printing bench units and the Nordreth Unit 300 was the one we kept. A year of steady use and the Nordreth Unit 300 still reads the way it did on day one. We would put another Nordreth Unit 300 in without much thought.
- MOMarta Ostrem★★★☆☆
2026-06-14Good, with one reservation about the Nordreth Unit 300
Have had the Nordreth Unit 300 in service long enough to say something useful about this dilatant-phase printing bench. Ordering spares for the Nordreth Unit 300 took longer than we would like. None of that would stop us buying the Nordreth Unit 300 again.