Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Anoxic sulphide scrubber / Ellmarch Hall 639

anoxic sulphide scrubber
USD 9411.53
Listed
Add to listConcept listing. No order can be placed.
The Ellmarch Hall 639 is an anoxic sulphide scrubber listed with throughput 785 litres an hour, operating temperature 50 degrees Celsius, feed salinity 69 parts per thousand. Its remaining stated figures are media service 3340 hours, unit price 9411.53 dollars, energy source gravity fed. Every one of them is quoted from the same six axes the other listings in this category are described on.
| throughput | 785 litres an hour |
|---|---|
| operating temperature | 50 degrees Celsius |
| feed salinity | 69 parts per thousand |
| media service | 3340 hours |
| unit price | 9411.53 dollars |
| energy source | gravity fed |
Showing the 7 most recent of 85 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
Still happy with the Ellmarch Hall 639
The Ellmarch Hall 639 was not the cheapest anoxic sulphide scrubber we considered, and that was fine. A year of steady use and the Ellmarch Hall 639 still reads the way it did on day one. Others may weigh it differently, but the Ellmarch Hall 639 suits us.
Where the Ellmarch Hall 639 falls short
Replaced a much older anoxic sulphide scrubber with the Ellmarch Hall 639 last season. Packaging on the Ellmarch Hall 639 was poor enough that we checked it over carefully on arrival. We would still recommend the Ellmarch Hall 639, with that said up front.
Chose it on operating temperature 50 degrees Celsius
Bought the Ellmarch Hall 639 after a long comparison against the rest of this anoxic sulphide scrubber shortlist. Its operating temperature reads 50 degrees Celsius, and that is the whole reason it is here. Would choose the Ellmarch Hall 639 again on the same grounds.
785 litres an hour is the right throughput for us
Went through the whole anoxic sulphide scrubber catalogue twice before the Ellmarch Hall 639. On paper the throughput is 785 litres an hour, and that matched the requirement exactly. The other anoxic sulphide scrubber listings are close to the Ellmarch Hall 639 on everything but throughput.
Bought this anoxic sulphide scrubber for 69 parts per thousand
Came to the Ellmarch Hall 639 on a recommendation and checked its anoxic sulphide scrubber figures ourselves. Its feed salinity reads 69 parts per thousand, and that is the whole reason it is here. At 69 parts per thousand it does not need to stand out anywhere else.
Second time around with an anoxic sulphide scrubber: the Ellmarch Hall 639
We looked at most of the anoxic sulphide scrubber listings before settling on the Ellmarch Hall 639. We ran something older in this role before the Ellmarch Hall 639 and would not go back. The Ellmarch Hall 639 is still the right call for us.
Ours is not a heavy-duty use for the Ellmarch Hall 639
Have had the Ellmarch Hall 639 in service long enough to say something useful about this anoxic sulphide scrubber. We put the Ellmarch Hall 639 on the awkward jobs that the rest of the kit cannot take. We would put another Ellmarch Hall 639 in without much thought.