Synthetic research catalogue. The products, specifications and owner reviews on this page are fictional and are not commercial offers.
Catalogue / Active-layer retting vat / Hoskva Works 933

active-layer retting vat
USD 14773.35
Listed
Add to listConcept listing. No order can be placed.
The Hoskva Works 933 is an active-layer retting vat listed with working width 218 centimetres, process temperature 99 degrees Celsius, batch throughput 10.8 kilograms. Its remaining stated figures are cycle hours 32 hours, unit price 14773.35 dollars, drive type fully manual. Every one of them is quoted from the same six axes the other listings in this category are described on.
| working width | 218 centimetres |
|---|---|
| process temperature | 99 degrees Celsius |
| batch throughput | 10.8 kilograms |
| cycle hours | 32 hours |
| unit price | 14773.35 dollars |
| drive type | fully manual |
Showing the 7 most recent of 86 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
Worth knowing before you order the Hoskva Works 933
Replaced a much older active-layer retting vat with the Hoskva Works 933 last season. Packaging on the Hoskva Works 933 was poor enough that we checked it over carefully on arrival. It has not changed what we think of the Hoskva Works 933 overall.
Bought this active-layer retting vat for 218 centimetres
Shortlisted three active-layer retting vat units and the Hoskva Works 933 was the one we kept. Working width of 218 centimetres was the requirement, and it meets it. The rest of the Hoskva Works 933 specification did not enter into the decision.
Second time around with an active-layer retting vat: the Hoskva Works 933
Have had the Hoskva Works 933 in service long enough to say something useful about this active-layer retting vat. Our previous unit did the job; the Hoskva Works 933 does it without us watching it. We would put another Hoskva Works 933 in without much thought.
Installation notes for the Hoskva Works 933
Second active-layer retting vat we have run; the Hoskva Works 933 replaced an older one. The Hoskva Works 933 arrived ready to run, which is not what we expected. That is the whole of it, on the Hoskva Works 933 at least.
Ours is not a heavy-duty use for the Hoskva Works 933
The Hoskva Works 933 is our third active-layer retting vat and the first one specified properly. The Hoskva Works 933 sits in a seasonal operation, so it spends part of the year idle. That is the whole of it, on the Hoskva Works 933 at least.
Chose it on cycle hours 32 hours
Bought the Hoskva Works 933 after a long comparison against the rest of this active-layer retting vat shortlist. Its cycle hours reads 32 hours, and that is the whole reason it is here. At 32 hours it does not need to stand out anywhere else.
Batch throughput of 10.8 kilograms was the deciding figure
Went through the whole active-layer retting vat catalogue twice before the Hoskva Works 933. Batch throughput of 10.8 kilograms was the requirement, and it meets it. Would choose the Hoskva Works 933 again on the same grounds.