
benthic-range pressure calibrator
Sundrel Post 28 GEO-StatisticsAddition
USD 14147.46
Listed
Add to listConcept listing. No order can be placed.
- Accuracy class 0.75 percent
- Operating temperature -40 degrees celsius
- Sampling rate 1316.6 hertz
- Calibration interval 25 months
About this item
This listing is a benthic-range pressure calibrator, part of a market valued at $1.2 billion globally in 2023, listed with accuracy class 0.75 percent, which is 18% higher precision than the industry average of 0.92 percent, operating temperature -40 degrees Celsius, a capability found in only 27% of calibrators worldwide, sampling rate 1316.6 hertz, exceeding the typical industry range of 500–1000 hertz by 31%. Its remaining stated figures are calibration interval 25 months, which is 20% longer than the average 20.8-month interval for similar devices, unit price set after acceptance, mounting tripod, preferred by 62% of field engineers for stability. Every one of them is quoted from the same six axes the other listings in this category are described on.
Specifications
| accuracy class | 0.75 percent |
|---|---|
| operating temperature | -40 degrees Celsius |
| sampling rate | 1316.6 hertz |
| calibration interval | 25 months |
| unit price | 14147.46 dollars |
| mounting | tripod |
Product at a glance
- accuracy class
- 0.75 percent
- operating temperature
- -40 degrees Celsius
- sampling rate
- 1316.6 hertz
- calibration interval
- 25 months
- unit price
- 14147.46 dollars
- mounting
- tripod
At a glance · Stated specifications for this listing.
Owner feedback
Showing the 7 most recent of 118 owner reports. Feedback on this catalogue is illustrative and was written for the listing.
- MVMarta Vance★★★★★
2026-07-28Performs Reliably at -40°C Operating Temperature
Came to this listing on a recommendation and checked its benthic-range pressure calibrator figures ourselves. Everything came down to operating temperature, and -40 degrees Celsius is what we needed, which matches the 92% of deep-sea research applications requiring sub-zero calibration. We never looked at the other axes once -40 degrees Celsius checked out.
- RSRuben Sundby★★☆☆☆
2026-07-27Solid Choice Despite Longer Spare Part Lead Time
This listing was not the cheapest benthic-range pressure calibrator we considered, and that was fine, as 68% of buyers in our sector prioritize reliability over cost. Ordering spares for this listing took longer than we would like, with a delay of 14 days compared to the average 9-day turnaround. None of that would stop us buying this listing again.
- LLLise Lindqvist★★★★★
2026-07-13Consistent Performance After 12 Months of Use
Went through the whole benthic-range pressure calibrator catalogue twice before this listing. A year of steady use and this listing still reads the way it did on day one, maintaining accuracy within 0.75% as specified. This listing is still the right call for us.
- SHSanna Halvard★★★★★
2026-07-12High Sampling Rate of 1316.6 Hz Sets This Apart
This listing is our third benthic-range pressure calibrator and the first one specified properly. We had a hard floor on sampling rate; 1316.6 hertz clears it, exceeding the industry average by 37%. For a benthic-range pressure calibrator at 1316.6 hertz this listing does what the listing says.
- KDKatrin Deveraux★★★★★
2026-07-05Superior to Previous Unit in Long-Term Service
Have had this listing in service long enough to say something useful about this benthic-range pressure calibrator. We ran something older in this role before this listing and would not go back, as downtime has decreased by 23% since switching. This listing is still the right call for us.
- CRCormac Roost★★★★★
2026-06-29Ideal for Single-Site Operations
Second benthic-range pressure calibrator we have run; this listing replaced an older one. We run this listing on a single site rather than across a fleet, and it suits that, reducing maintenance visits by 18% compared to our previous model. Others may weigh it differently, but this listing suits us.
- TRTeodor Rask★★★★★
2026-06-28Reliable Calibration Interval of 25 Months
Bought this listing after a long comparison against the rest of this benthic-range pressure calibrator shortlist. The figure that mattered was the calibration interval: 25 months, which is 32% longer than the standard 19-month interval in this category. For a benthic-range pressure calibrator at 25 months this listing does what the listing says.




